Select one of the editions below


Edition #11, March 2005
Edition #10, February 2005
Edition # 8, November 2004
Edition #7, October 2004
Edition #6, September 2004
Edition # 5, August 2004
Edition #4, June 2004
Edition #3, April 2004
Edition #2, March 2004
Edition #1, January 2004

Dec 2003

  • Marketing degree through MCR research
  • Impact of clay construction in Orwetoveni
  • Masonry apprenticeship at SofoNic
  • Distributors are an important link
  • News
    • Cooking with the sun
    • Loja: Ecological City
    • Construction professionals host ECOSouth presentation

October 2003

  • SofoNic – a committed team (part 4)
  • MCR Encounter in Cali, Colombia
  • SIRDC MCR tile launch
  • Behind the scenes with ecomaterials
  • 5-day MCR training program in Zimbabwe
  • News
    • Bicycle race in Jinotepe
    • CD about urban waste management
    • Prize to Nigerian CP40 blocks

Sept 2003 (II)

  • MCR premiere in industrial sector in Dhaka
  • An Update from El Salvador
  • SOFONic – Focuses of their work (part 3)
  • Making MCR tiles is like making tortillas
  • Grupo Sofonias honored as Tech Award finalist
  • News
    • Followup and quality evaluation in Salvador
    • Plaster analysis in Guatemala
    • Participative design for urbanization

September 2003

August 2003

  • High quality MCR in Bangladesh
  • Sofonic – a committed team
  • MCR roof post-Mitch in Honduras
  • Batteries or transformers?
  • Columbian decision-maker gets overview of MCR in Riobamba
  • News
    • CP-40 blocks now produced in Nigeria
    • MCR roof in Angola
    • Professors

July 2003

  • Decoding empirical knowledge – plaster research
  • Training important at Clay House Project - Namibia
  • Metal Roof Structures resolve timber scarcity
  • SIRDC hosts MCR seminar in September
  • News
    • New equipment bank in Guatemala
    • South-south interchanges: New MCR equipment in Columbia
    • CIDEM professor provides expertise in Bangladesh
    • A bit of history

June 2003

  • Guillermo, a voice we should heed
  • Metal structures for MicroConcrete Roofing
  • Cooking stoves and brick production – a burning problem
  • An ecomaterials workshop
  • News
    • Aids program in CHP Namibia
    • Alfredo in Ecuador
    • Pedals for Progress extends in Nicaragua

May 2003

  • Supereconomic houses: an affordable solution for working people
  • Gastronomical and Cultural Encounter of Cuy in Riobamba
  • Building upwards – a simple and affordable ceiling slab
  • First ecomaterials workshop in Panama in full production
  • Sustainable management of natural resources in Nicaragua
  • News
    • Las Melidas publishes calendar
    • CHP construction goes ahead in Otjiwarongo
    • Producing bricks with sawdust briquettes

April 2003

  • Guatemalan tile producers discuss client survey
  • “Las Mélidas” hosts meeting of Salvadorean MCR producers
  • Networking Cuba-Ecuador
  • Ecomaterials introduced to Ecuadorean universities
  • Synergies in Salvador adobe project
  • News
    • Ecomaterials lecture at the College of Engineers
    • A brickmaking village and a university research institute
    • Cleanest moulds ever seen!

February 2003

  • Networking from Namibia to Bangladesh
  • Investigation about plaster underway in Ecuador
  • Managing a MCR Business
  • Creative strategy for marketing MCR in Ecuador
  • News
    • MCR Standards in Zimbabwe
    • Guatemala - investigation about plaster underway
    • Women tilemakers in Mexico receive enterprise award
    • BSHF calendar includes “Two decades after the earthquake”

January 2003

  • La Betania, just another barrio in a satellite city?
  • Cuba: 3ra. ruta ecologica Holguín - Santa Clara
  • ECOSOUTH NETWORKING – from Namibia to Thailand
  • Three MCR Clusters in Ghana
  • News
    • Women tilemakers in Mexico receive enterprise award
    • BSHF calendar includes “Two decades after the earthquake, Guatemala”

December 2002

  • Coloring MCR tiles
  • Visit to housing developments in Colombia and Ecuador
  • A creative solution for water catchment
  • Networking in Zimbabwe
  • News
    • Outpouring of questions to the EcoSouth WebSite
    • New book by EcoSouth caricaturist Martirena
    • Microconcrete technologies used in hotel in the Dominican Republic

November 2002

  • Building materials supply - a strategy for disaster relief
  • IYM – Slow Food Award to Ecuadorian Radio Station
  • EcoSouth Certificate Quality for MCR workshops
  • EcoSouth expert in Mozambique
  • News
    • Technical sheet about sand and mortar mixes for MCR tiles
    • Colombia: FENAVIP director appointed vice-minister of housing
    • Ecuador: Study visit to housing projects in Ecuador and Colombia
October 2002
  • Construction in Earth and Clay congress in Germany
  • MCR Exposure Course in Cameroon
  • Year of the Mountains: From the Andes to the Alps
  • News
    • Namibia: Adobe Factory
    • Ecuador: Producers and students analyze the MCR market in Ecuador
    • Nicaragua: Elaborating action program for investigation about plastering

Experiencies of the ECOSouth network

Experiences in disaster prevention
Investigations & Research

The tevi MicroConcrete Roof tile production unit can produce up to 350 MicroConcrete Roof (MCR) tiles per day

The tevi MicroConcrete Roof tile production unit includes:

  • One vibrating table machine with short chassis and electric motor of 12 V 8A.
    The machine also works with a car battery or solar panels (not included).
  • AC inverter from 110-120V a 12 V 8A
  • 200 plastic moulds to start producing roman tiles
  • Metal frames for roman tiles, ridge tile and vault slabs
  • Scale and spoons for dossification
  • Basic testing equipment (quality control) for the workshop
  • Spare parts kit and maintenance tool
  • Printed manuals, training video and CD-ROM
  • NEW: Now includes the Ridge Closer Tile frame
You don't buy only the equipment.
The tevi MicroConcrete Roof tile
production unit includes all the KNOW-HOW

The tevi MicroConcrete Roof tile production unit is ready to start producing:

  • Roman tile
  • Ridge tile
  • Verge tile at 90º
  • Mini vaults

The tevi MicroConcrete Roof tile production unit works with an AC Inverter or by itself with car batteries or solar panels

Follow this links for more information :

Prices and more information
Frequently asked questions

Pieces produced with the tevi MicroConcrete Roof tiles production unit
Minimum floorplan of a MicroConcrete Roof tile production factory
Photos: MicroConcrete Roof tiles manufacture
Photos: Roofs with MCR technology
Photos: Tile, ridge tile, verge tile at 90º
Photos: Ridge closer tile
Photos: Mini vault

The tevi MicroConcrete Roof tile
production unit is recommended
as the best in its class by the
Basin Network

The MB-600 ball mill has been designed to mill and to mix lime with puzzolanic ashes to obtain Pozzolanic Cement CP40

The MB-600 is built to last and to work in any weather, outdoor or indoors.

Concrete mixers and MicroConcrete mixers
Vibrating Presses to produce blocks, floor tiles, and other small concrete pre-cast high quality elements
Adobe (mud bricks, compressed soil) presses
 Quality control equipment for MCR and CP-40 workshops

Ecomaterials is a word created by EcoSouth to define construction materials that are ecologically and economically viable. We promote the use of traditional technologies that use local materials, but also new interpretations and developments, nonetheless, at times it is difficult to encounter methods and traditional customs en some places, as the propaganda for industrial products has marginalized many popular solutions.

 Ecomaterials is a word created by EcoSouth to define construction materials that are ecologically and economically viable. We promote the use of traditional technologies that use local materials, but also new interpretations and developments, nonetheless, at times it is difficult to encounter methods and traditional customs en some places, as the propaganda for industrial products has marginalized many popular solutions.

Cocinando los EcoMateriales

Local artesans have been placed in a defensive position and the population harbors doubts concerning the use of traditional materials and technologies. For decades, universities have concentrated upon the “modern” materials such as steel and cement, and have disregarded clay and other lost-cost materials. Besides, government have created construction regulations that, de facto, prevent a majority of their citizens to build houses. The manual and decentralized production of material places is in danger as the manufacture of construction materials is with large companies in the urban areas.

EcoSouth experts seek to encounter the prime material of a particular place and combine them with known technologies, when possible from the same region. However, at times it is necessary to transfer knowledge from one place to another, even from one continent to another. Nevertheless, this can never be reduced to “applying a recipe”, it has to be a creative combination that takes into account technical, social and economic factors. Sometimes the solution is quickly evident, but a time it requires an intensive analysis of certain prime material in order to assess its feasibility.

EcoSouth works intensively with traditional technologies such as stone masonry, clay (adobe) and brick, the efficient burning of clay bricks, small-scale lime burning, as well as construction of vaulted roofs. Also important is the research and development of new products, based upon antique knowledge.

Small-scale production of MicroConcrete Roofing tiles (MCR) is an impressive success, and EcoSouth continue to be the world leader in this technology. At the moment, small production units that manufacture alternative cement have begun to position themselves in the market.

Muchas tecnologías

Early in our work we became aware of two basic problems in developing countries, the tremendous deforestation and the high incidence of imported construction materials. Thus, we began to seek solutions for roofs that would use less wood, as well as substitute imports.

Having read about investigations into handmade fiber-concrete roofing sheets, we began to experiment ourselves. Soon after the first roofs had been laid we discovered that not only was it difficult to obtain a perfect fit between the sheets, but also that they were fragile and difficult to handle. After some times cracks appeared and we realized that they were not feasible for our purposes. It was clear that the size had to be reduced and some sort of mechanical process developed in order to guarantee consistency of size and fit.

About that time, SKAT organized a seminar in Switzerland where it gathered together people from many countries who had been experimenting with hand made roofing sheets. Sofonias was prepared to tell the seminar to forget everything. Then, another participant revealed a small vibrating machine and polyethylene mould to make roofing tiles.

We bought a machine and began production!

Alfredo Martirena

Convinced that Micro Concrete Roofing (MCR) tiles were an ecologically and economically viable solution for roofs, we presented a project to the Swiss Development Cooperation. From the modest beginnings of twenty pilot plants in six countries by 1990, MCR has spread throughout Latin America so that at the end of 2002 there are about 650 workshops currently employing more than 3000 people in twelve countries. All these small businesses have raised their own financing and thus the program has been outstanding in the mobilization of capital.

Annual MCR tile production in Latin America is around 3,000,000 square meters, about 50,000 roofs. Accumulated production has resulted in some 350,000 roofs. In any event, close to two million people have elegant, enduring and economical roofs over their heads!

Throughout the past ten years the project has been able to develop a network of producers, consultants and university research institutes, and the activities have expanded to include other ecomaterials. The EcoSouth Network is the vehicle for dissemination, education, quality control and investigation. Its consultants have provided advice and introductory and follow-up courses well beyond Latin America, into Africa, Asia and the ex-Soviet Union.

CP40 is a hydraulic binder produced from the mixture of a material known as Pozzolana and finely ground Calcium Hydrate. This binder is of low mechanical strength and its setting speed is a little bit slower than Portland Cement. Because of this, it can be considered as a cement for masonry applications. Lime-pozzolana binders had their origin in the constructions made by the Romans. Even today the ruins of great buildings made with this material are still preserved.

What is meant by pozzolanas?

The ASTM code (1992 in the definition 618-78 states the following: “pozzolanas are siliceous or alumino-siliceous materials which have little or no cementing value by themselves, but when finely ground and in the presence of water, they chemically react with calcium hydroxide at room temperature in order to form compounds with cementing properties”.

What are the main types of pozzolanas?

Volcanic rocks, in which the amorphous constituent is glass produced from the sudden cooling of lava. For example, volcanic ashes, pumice, tufa, slags and obsidian. Rocks or soils in which the siliceous constituent contains opal, either by siliceous precipitation from a solution or from the residues of organisms, such as diatom earths or clays naturally calcinated from the action of heat or from a lava flow.

Artificial pozzolanas:
Flying ashes: the ashes produced during the mineral carbon combustion (lignite), mainly in thermal plants that generate electricity.
Activated or artificially burnt clays: for example, residues from burning clay bricks as well as other types of clays subjected to temperatures higher than 800 °C.
Slags: mainly from ferrous alloys in blast furnaces. These slags must be violently cooled so that they an amorphous structure can be formed.
Ashes from agricultural residues: rice shell ash, bagasse ash and sugar cane straw. When conveniently burnt, a mineral residue rich in silica and alumina, whose structure depends on the combustion temperature, is obtained.

How can the properties of the pozzolanas used be improved?

The properties of pozzolanas depend upon the chemical composition and the internal structure. Pozzolanas with a chemical composition in which the presence of the three main oxides (SiO2, AL2O3, Fe2O3) is greater than 70% are preferred. The objective is to have pozzolanas with an amorphous structure. In the case of pozzolanas obtained from agricultural wastes (sugar can and rice ashes), the most viable way to improve their properties is through controlled burning in simple incinerators where the temperature and time of residence of the material are controlled. If the biomass burning temperature falls in the range of 400-760 Celsius the silica occurs in amorphous phases that are likely more reactive. For higher temperatures, crystalline phases of silica, little reactive at room temperature, begin to form.

How is CP40 produced?

CP40 is produced from a mixture of very fine lime hydrate and pozzolana powders with an average proportion of 70% pozzolana and 30% lime. The material obtained demands a fineness similar to that of common Portland Cement (250-300 m2/kg Blaine Test).

The lack of shelter in developing countries is a constant problem. Mainstream materials and technologies are far from being a solution for the poorest sectors of society, which have to struggle for their daily bread. It is clear that a response to this situation must have a radically different political and technological approach. Self-construction with clay has proved to be a most appropriate response in several countries of Asia, Africa and Latin America and, perhaps, it is the only possible way by which poor people can get a decent house.

In some Asian countries, such as Tajikistan, clay is taken directly from the ground and molded in the foundations to build up walls which grow higher as the clay dries. However, this article concerns itself with adobes or “sun-dried clay bricks” and their correct and safe use for dwellings according to experiences in different parts of Latin America.

The process begins with a correct selection of the soil to make adobes, that is, a soil not of pure clay, but that contains sand as well, in an approximate range of 40 to 60%. The soil is mixed with water and left for three days to achieve the appropriate fermentation. Then, some test adobes are made. In most cases, natural fiber is added to the adobe to obtain better results. If adobes crack in the drying process, sand must be added, but, if they do not resist a man´s weight once they are dry, clay is the material to be added to make them stronger. In any event, a practical test must be carried out in order to obtain the right mixture.

Once the appropriate mixture is found, adobe production begins with the use of metal or wooden molds. Where seismic conditions exist, the molds should be square and a size of at least 30x30x8cm, often 40x40x8 cm is used. Half size adobes should be produced for easy fitting in corners and “T” wall intersections. Adobe bricks are dried in the sun and they can be used after 10-15 days, once they are totally dry.

The plot of land for an adobe house should be level, dry and solid, and the house must be placed on the highest part to avoid water penetration. Foundations must be strong, and 1.5 times the width of walls, for which cyclope concrete (calicanto) is recommended. The first layers of the upper part must be watertight in order to protect walls from erosion. To assure this, the foundation of cyclope concrete or bricks can extend above the surface. In area of high seismic activity, a concrete ring beam is obligatory.

The first row of adobes must be laid using a lime mortar and, afterwards, the same clay material as used for the adobes is used as mortar.

The shape of the house should be either square, rectangular or circular. Because of earthquakes, no irregular forms are recommended. During construction, all walls should be built up evenly, but never more than one meter a day, in order to protect the first layers from excess weight until the mortar has dried out. The total length of the wall should not be ten times greater than its thickness, otherwise, buttresses, also recommended for all wall intersections, would become necessary. Openings for walls and windows should not be wider than 1.20m and the sum of them should not be more than one third of the total length of the wall. . Openings may not be located closed to corners. A reinforced concrete beam should be placed on top of the wall, as a solid base for the roof construction. Often this beam may serve at the same time as lintel over doors and windows.

There are no specific rules for roofs, but the overhang must be as large as possible in order to protect the walls from the rain. Be aware that in earthquakes it is often a collapsing roof that causes the walls to fall, so make sure you build a solid structure !

Walls must be plastered for protection from rain and erosion. Experience has revealed that a first layer, with a sand/clay mortar at a 3:1 proportion is best. Its thickness should be just enough to have a flat surface. Then, a finishing coat with a lime mortar (lime:sand=2:1) is applied with a thickness not exceeding 2mm.

Small scale lime burning in Namibia

Investigations into various construction materials that can be produced locally have formed part of the ongoing activities at the Clay House Project in Otjiwarongo, Namibia. The onsite team comprised of several EcoSouth experts quickly saw the connection between the devastating bush encroachment and the wide-spread lime deposits throughout the region. Gate agreed to support investigation of the use of bush encroachment as the combustion material for burning lime and to ascertain the quality of lime. Upon determination that commercial quality lime could be produced, a second phase concentrated upon constructing a simple oven to burn lime with vistas toward its commercialization.

Prof. Ruiz

Prof. Nolasco Ruiz of CIDEM was the project leader and was able to construct a viable oven with clay bricks. The Clay House Project technician onsite could draw upon the farmhands as a workforce. This was an integral part of the project concept, that farmers could burn lime at the beginning of the dry season, thereby providing work for their farmhands.

The lime-burning at Otjiwarongo has attracted widespread interest from other municipalities, as well as local organizations and farmers interested in using the lime.

During the trial firings Prof. Ruiz and his team were able to produce nine tons of excellent lime. During the following months some of this lime was used to plaster the walls of the newly built clay houses, as well as a kindergarten built by a group of poor local women.

The behavior of the lime upon slaking was very good and with simple sieving and some selective crushing the lime was ready for use. Only a small amount of “bones” (unburned rocks) were discovered, something that normally happens whenever lime production begins. Upon termination of the trial burnings, the technicians and workers were able to determine the exact percent of each size of limestone, as well as the time and temperature required for burning.

The design of the kiln has proven to be correct and its performance was good. Some small cracks did appear, which was expected as the shrinking of the clay bricks (adobe) was factored into the design. Those cracks have been filled in and will not be a limiting factor to the kiln´s performance.

The use of adobe bricks for the walls of the kiln helps reduce the price of the materials, mainly the part of the price which should be paid to foreign producers and now is going to the very poor families which are making adobe bricks.

How we get from our house to place of work is a major factor in daily living. In most developing countries, public transport is insufficient and inadequate and most people simply have no way of getting to work other than a several kilometer footmarch.

Thus, part of our response to integrated and environmentally friendly development was to make bicycles available to the masses.

A process of investigation and synergies with other organizations revealed that almost all of the world’s bicycle parts are manufactured in India and China. Thus, we were able to involve a Latin American engineer studying the question of bicycle transport in Europe. We dispatched him to India to investigate the situation and eventually he instructed the first workers and this paved the way to several bicycle assembly projects.

The full bicycles in “knocked down” state were purchased in India and shipped to Nicaragua to be assembled. This local industry has become fully self-sustaining and for around fifteen years has provided a viable means of transportation to the local population.

I is easy to know when the town of Rivas is approaching, as dozens of bicycles began to appear on the roads. Bicycle traffic is commonplace in this southern area of Nicaragua, as workers mobilize themselves to the sugarcane fields or factories, deliver bread or mangoes, and schoolchildren get to classes on time.

Not only is the bicycle an environmentally friendly means of transport; for most people it is an achievable dream.

Con bicicletas

Taken out of “From Disaster to Dignity"
published by EcoSouth about 20 years of Grupo Sofonias

A pool of international experts in the fields of construction, planning, management, evaluation  and disaster prevention, can metamorphose into multi-disciplinary consulting teams, such as those who were engaged in post-disaster reconstruction in Nicaragua and Honduras. Expertise in EcoMaterials covers the spectrum from research to production, knowledge that has been shared throughout Latin America as well as other continents. EcoSur consultancies have reached many African countries, including Namibia, Kenya, Nigeria, Mozambique; Asian countries such as Bangladesh, Sumatra, Sri Lanka, Vietnam; as well as Tajikstan and Jeman. While Spanish is the common language at EcoSur, we can draw upon expertise in English, Russian, French and German.

Alfredo Martirena

Información general de la red ECOSur, sus productos y servicios.

Humour, por Alfredo Martirena
You are here: Home All articles


Martín Meléndez
Civil Engineer
Spanish and English
Microconcrete roofing tiles (MCR), CP 40 (alternative cement), adobe, tapial, burnt clay bricks, social organization, workshop planning for MCR and alternative cement, setup and implementation of housing projects, disaster prevention in construction


In 2005, SofoNic has started a dual education program for masons in Nicaragua, using its house-building programs as a base. Teaming up with the local technical school in Jinotepe they are graduating about ten masons every year since. Most f them have found jobs in construction or have started a business on their own. SofoNic has contracted several of them as master masons in the reconstruction programs in Haiti.